The Easiest Ways to Build a Deck by Understanding the Basics

 1.jpg

There are many houses nowadays that uses decks as an extension of the living areas of the home and part of the garden landscaping. This is a flat surface which is capable of supporting weight and is usually elevated from the ground like a floor. After the 1960s, due to over logging, the use of softwoods has declined and shifted to hardwoods when it was softwoods that are being used for deck construction back in the days. It looks better for spaces like cooking, dining and seating and is more durable. You will learn how to build your own deck, using the easiest ways in this article. These methods have been passed down from generations of wood workers. If you will understand the basics of deck construction, and tempt to do it yourself is feasible. Your carpentry skills may not be superb or you may be unsure, but if you know all the basics then it is not going to be a problem.

It is best to determine first with your local building authorities if there are any restrictions and or if building permits are required according to Inverness Deck Construction before even contemplating a deck. Some communities will tell you build it close to your property lines, some will require you to reach this certain height, dimensions of railings, structural supports, and dimensions of stairways. You have to remember that if you have carefully considered all the possibilities up front and your options, you can expect that things will go smoother.

After a careful planning and considering all your options, you will have to procure all the tools and materials you will need for your project. You can buy them or borrow them, if you don’t own them yet.

The typical tools you will need.

1.Circular Saw

2.Table Saw

3.Power Miter Saw

4.Wheelbarrow

5.Carpenter’s Level

6.Shovel

7.Caulk gun

8.Carpenter’s Square

9.Wrenches

10.Drill and bits

11.Hammer

The typical materials you will need.

1.Caulk

2.Metal flashing

3.Gravel

4.Post Caps

5.Post bases

6.Cinder blocks

7.Pre-mixed concrete mix

8.Joist hangers and nails

9.Metal rebar

10.Seismic ties

11.Cardboard tube concrete forms

12.Deck screws or HDG nails

13.HDG bolts and washers

Including 6 x 6 or 4 x 4 posts, 2 x 10 or 2 x 12s for beams and joists, 2 x 4s as structural members, and 1x for decking boards, are what you will also need, these different lumber dimensions.

Prepare the Site. A shovel is used to remove any grass or weeds in the area. The ledger is attached to the side of the house while the posts are marked in all locations.

Installation of Ledger, Footings and Posts. After digging holes and pouring concrete, posts can be embedded into the concrete itself.

Installation of Support Beams and Joists. And joists are attached to the ledger board and the other end to the support beams.

Lay the Decking. And lastly, finish your deck with stain and sealer immediately. Know about Inverness Deck Construction here!

Advertisements